These instructions were written using the D-Link Wireless G Router, model number WBR-1310. The process should be very similar for comparable models of D-Link Wireless Routers. This process will work on any computer (Windows, Mac, or Linux).
Website: web.augsburg.edu | Filesize: 4800kb
No of Page(s): 4
• Connect your computer to the internet using the wall port provided in your room. You must have a functioning connection (including Clean Access) before you can set up your router.
• If you have trouble with this setup and have previously used your router somewhere else, reset your router to factory default settings and start over at the beginning of these instructions. To reset your router, connect the power cord to the router and use a bent paperclip or other tool to press the reset button on the back of your router. The reset button is inside a hole surrounded by a gray circle (see image below). Hold the reset button for 10 seconds, then release it. The router lights will blink while it resets.
Finished: You can now connect your computer wirelessly to your wireless network. You will need the password you chose in step 7. If you want to share your wireless connection with your friends, they’ll need to know your network’s name, and the password.
Get the file Download here